| Attribute | Description |
|---|---|
| ISO_COUNTRY_CODE | Identifies the country in which the navigable link or administrative area is located. 3 character country code based on ISO Standard 3166. CHN : China Mainland CHN : 中国大陆 HKG : Hong Kong SAR HKG : 香港特別行政區 MAC : RAE de Macau MAC : 澳門特別行政區 |
| COUNTRY_ID | Defining the area of this regulations: Permanent identifier for the country. |
| ORDER1_ID | DEPRECATED, use RESTRICTION_CATEGORY_CODE and ADMIN_PLACE_ID instead. |
| VEHICLE_TYPES | Access Characteristics identify the vehicle types that are allowed on a link, allowed on a lane or to which a condition applies. 16 bit bitmask of affected vehicle types or functions. Sum of: Automobiles (1), buses (2), taxis (4), car pools (8), pedestrians (16), trucks (32), deliveries (64), emergency vehicles (128), through traffic (256), motorcycles (512) and road trains (1024). |
| AXLE_COUNT | Number of axle of the vehicle. Can be interpreted as minimum number of axle if no higher value is available for the vehicle layout. |
| TRAILER_OR_TRUCK_CLASS | Defining the number or kind of trailers or the layout of the roadtrain. It is possible that vehicles fall into different categories, e.g. the tractor unit of a road train must also obey to the rules of a single motor vehicle. 10000 applies to single motor vehicles 10010 applies to motor vehicles with one trailer 20000 applies to tractor without semitrailer or without specified trailer 20001 applies to tractor with one semitrailer 20002 applies if it is not a tractor with one semitrailer |
| WEIGHT_RESTRICTION | Weight restriction applicable to the Transport condition. Unit: kilograms |
| HEIGHT_RESTRICTION | Height restriction applicable to the Transport condition. Unit: centimeters |
| LENGTH_RESTRICTION | Length restriction applicable to the Transport condition. Unit: centimeters |
| WIDTH_RESTRICTION | Width restriction applicable to the Transport condition. Unit: centimeters Note: In most European countries the width restriction for refrigerated vehicles is increased by 5cm. |
| SINGLE_AXLELOAD_RESTRICTION | DEPRECATED - Please use AXLE_TYPE and AXLE_LOAD_RESTRICTION |
| DRIVEN_AXLELOAD_RESTRICTION | DEPRECATED - Please use AXLE_TYPE and AXLE_LOAD_RESTRICTION |
| TRAILER_TYPE | -1 = applies to any 0 = applies to trucks without trailer 1 = applies to trucks with 1 or more trailers 2 = applies to trucks with 2 or more trailers 3 = applies to trucks with 3 or more trailers 4 = applies to (semi or tractor) with 1 or more trailers 5 = applies to trucks with 0 or 1 trailer 1 : TRUCK WITH ONE OR MORE TRAILERS 10 : STRAIGHT TRUCK WITH ONE OR MORE TRAILERS 11 : STRAIGHT TRUCK WITH TWO OR MORE TRAILERS 12 : STRAIGHT TRUCK THREE OR MORE TRAILERS 13 : STRAIGHT TRUCK WITH OR WITHOUT TRAILERS 14 : STRAIGHT TRUCK WITH NO TRAILER(S) 15 : STRAIGHT TRUCK WITH ONE TRAILER 16 : STRAIGHT TRUCK WITH TWO TRAILERS 17 : STRAIGHT TRUCK WITH THREE TRAILERS 18 : STRAIGHT TRUCK WITH FOUR TRAILERS 19 : SEMI-TRUCK WITH ONE OR MORE TRAILERS 2 : TRUCK WITH TWO OR MORE TRAILERS 20 : SEMI-TRUCK WITH TWO OR MORE TRAILERS 21 : SEMI-TRUCK WITH THREE OR MORE TRAILERS 22 : SEMI-TRUCK WITH OR WITHOUT TRAILERS 23 : SEMI-TRUCK WITH NO TRAILER(S) 24 : SEMI-TRUCK WITH ONE TRAILER 25 : SEMI-TRUCK WITH TWO TRAILERS 26 : SEMI-TRUCK WITH THREE TRAILERS 27 : SEMI-TRUCK WITH FOUR TRAILERS 3 : TRUCK WITH THREE OR MORE TRAILERS 4 : SEMI OR TRACTOR WITH 1 OR MORE TRAILERS 5 : TRUCK WITH NO TRAILER(S) 6 : TRUCK WITH ONE TRAILER 7 : TRUCK WITH TWO TRAILERS 8 : TRUCK WITH THREE TRAILERS 9 : TRUCK WITH FOUR TRAILERS |
| TRAILERLENGTH_RESTRICTION | Max. length of trailer restriction. Unit: centimeters |
| DATE_TIMES | If Date Time descriptions are set, restrictions apply only to these time windows. Comma seperated list of Date/Time modifiers to indicate specific time periods when the condition applies. One entry contains following colon seperated values: DATETIME_TYPE: High level indication of the period for which the date time restriction is valid. The value of this type effects the interpretation of START_DATE/END_DATE C - Day of Month, where the START_DATE/END_DATE have the format DDDD0000 and DDDD is in the range of 0001 - 0031. Example: 00010000 - f.e. 1 January, 1 February,..., 1 December Another example would be 'C:N:N:00010000:00050000:1230:1330': for each first to fifth day in all month from 12:30 to 13:30h. D - Day of Week of Month, where the START/END_DATE have the format DDDDWWWW and DDDD is in the range of 0001 - 0007 and WWWW is in the range of 0001 - 0005. Example: 00010002 - 2nd Sunday of each month, 00020001 - 1st Monday of each month, 00070002 - 2nd Saturday of each month, 00060005 - 5th Friday of each month Another example would be 'D:N:N:00070001:00070001:1000:1600': each first Saturday in all month from 10:00 to 16:00h E - Day of Week of Year, where the START/END_DATE have the format DDDDWWWW and DDDD is in the range of 0001 - 0007 and WWWW is in the range of 0001 - 0052. Example: 00030020 - Tuesday of week 20, 00050052 - Thursday of week 52 Another example would be 'E:N:N:00010015:00010015:800:1800': Sunday in week 15 between 08:00 and 18:00h F - Week of Month, where the START_DATE/END_DATE have the format DDDD0000 and DDDD is in the range of 0001 - 0005. Example: 00020000 - 2nd week of each month Another example would be 'F:N:N:00030000:00040000:800:1730': from the 3rd to the 4st week from 08:00 to 17:30h H - Month of Year, Example: 00010000 - January, 00070000 - July I - Day of Month of Year, Example: 00150001 - 15 January of each year, 00300004 - 30 April of each year Another example would be 'I:N:N:00010010:00110010:1730:2400': from October 1st to October 11 each day from 17:30 to 24:00h 1 - Day of week starting with Sunday, Example: X XX - Sunday and Friday and Saturday, XXXXXXX - all weekdays Another example would be '1:N:N:XXXXXXX ::700:1900': each day in a week from 07:00 to 19:00h It can also restrict the applicable months: 1:N:N:XXXXXXX :0311:700:1900 from March to October 2 - External date, Example: Easter which would be '2:N:N:EASTER:01512131:800:1800' - as per specification there is no end data, so ignore values in END_DATE A - Date Ranges, Example: 20131119 - 19th of november year 2013 For Date Time Type = A-I, the Start Date represents the start of the range and the End Date represents the end of the range. For Date Time Type = 1, Start Date identifies the day(s) of the week. End Date is not published for Date Time Type = 1. For Date Time Type = 2, Start Date identifies the name of the external date. The only currently existing situation is "Easter". End Date is not published for Date Time Type = 2. FROM_END: This attribute allows time to be specified 'from the end' of a standard time period such as month and year EXCLUDE_DATE: Flag that indicates if the specified data (in Date Time Type) represents an excluded date. Example, all year except 30 April is modelled Exclude Date = Y, with Start Date = 30 April. START_DATE: Identifies the start dates of the Date/Time for Date Time Type = A-I. Identifies the days of the week for Date Time Type = 1 and the external date for Date Time Type = 2. END_DATE: Identifies the end date of the Date/Time for Date Time Types = A-I. START_TIME: Identifies the start time for the time period in which the Date Time restriction is in effect. Time in format HHMM, where a 24 hour clock is used. Range 0000...2400. Example: 1130 means 11:30 and 2115 means 21:15 END_TIME: Identifies the end time for the time period in which the Date Time restriction is in effect. Time in format HHMM, where a 24 hour clock is used. Range 0000...2400. Example: 1130 means 11:30 and 2115 means 21:15 |
| RESTRICTION_CATEGORY_CODE | Code indicating the restriction category. It is 4 digits coding without leading zero(s). First digit: administrative order of restricted area. 0 = Country; 1 = Order1; 2 = Order2; 8 = Order8 Second digit: type of date time. 0 = Date Time Independent; 1 = Public Holiday; 2 = Weekend; 3 = Morning; 4 = Noon; 5 = Evening; 6 = Night; 7 = From Dawn to Dusk Last two digits are reserved and always having 0 for now. Example: 1100 = Countrywide restriction on public holidays |
| ADMIN_PLACE_ID | Permanent administrative place ID. An administrative place is a government defined entity like a city, region, county, state or country. IDs are permanent across map releases and are never reused. |
| ROUTE_ADMIN_PLACE_IDS | Comma seperated admin place ids which need to be part of the route in that order. Used in cases where driving directions restrictions apply. F.e. LUX has different saturday/sunday driving time restrictions if vehicles pass from FRA to GER or GER to FRA |
| AXLE_COUNTS_APPLICABLE | Indicates the different number of axles (two axles, three axles, four axles,...., two or more, three or more, ...) that are applicable for a truck restriction. 8 bit bitmask of applicable axle counts. Sum of: TWO_AXLES (1), THREE_AXLES (2), FOUR_AXLES (4), FIVE_AXLES (8), SIX_AXLES (16), SEVEN_AXLES (32), EIGHT_AXLES (64), NINE_AXLES (128). For example: value of 255 (bitmask: 11111111), indicates restriction applies to vehicle with TWO_OR_MORE_AXLES; value of 224 (bitmask: 11000000), indicates restriction applies to vehicle with EIGHT_OR_MORE_AXLES. |
| TRUCK_TYPE_AND_TRAILER_COUNT | Indicates the combination of truck type (truck/tractorTruck) and trailer(number of trailers) combination that is applicable to a truck restriction on a link or lane. 8 bit bitmask of applicable truckType and trailer count. Sum of: TRUCK (1), TRACTOR_TRUCK (2), ZERO_TRAILER (4), ONE_TRAILER (8), TWO_TRAILERS (16), THREE_TRAILERS (32), FOUR_TRAILERS (64), FIVE_TRAILERS (128). For example: value of 25 (bitmask: 11111101), indicates restriction applies to a truck with any trailer count; value of 11 (bitmask: 00001011, indicates restriction applies to any truck (normal truck/ tractor truck) with one trailer. |
| AXLE_TYPE | Single applicable to following axle types: 0 = STEERING_AXLE 1 = SINGLE_AXLE 2 = TANDEM_AXLE 3 = TRIPLE_AXLE 4 = QUAD_AXLE 5 = QUINT_AXLE |
| AXLE_LOAD_RESTRICTION | Restriction of load applicable to a axle of type AXLE_TYPE. Unit: kilograms |